Montana SV6 V6-3.9L (2007)
1. Install the battery current sensor (2) by passing the ground end of the negative battery cable (1) through the sensor. Slide the current sensor to the
battery end of the cable in order to encompass all ground wires attached to battery.
Important: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable. Also ensure
that ALL grounding wires connected to negative post of battery pass through the sensor.
2. Wrap electrical tape (3) around the battery current sensor (1) in order to secure the battery current sensor to the negative battery cable (4).
3. Install the negative battery cable.
