Montana SV6 V6-3.9L (2007)
Power Steering Line/Hose: Service and Repair
Power Steering Pump Inlet Pipe Replacement
Power Steering Pump Inlet Pipe Replacement
Removal Procedure
1. Remove the intake manifold cover.
2. Remove the drive belt.
3. Position a drain pan under the vehicle in order to catch any draining power steering fluid.
4. Compress the clamp and disconnect the power steering pump inlet pipe/hose from the power steering reservoir.
5. Remove the power steering pump and gear inlet pipe/hoses routing clip nut at the generator.
Separate the power steering pump inlet pipe/hose from the routing clip.
6. Raise and support the vehicle. Refer to Vehicle Lifting.