Montana SV6 V6-3.9L (2007)
2. Install the control valve body bolts (375, 379, 381) that mount the fluid pressure manual valve position switch to the control valve body (300).
*
Tighten the control valve body bolt (375) to 12 N.m (106 lb in).
*
Tighten the control valve body bolt (379) to 16 N.m (12 lb ft).
*
Tighten the control valve body bolt (381) to 8 N.m (70 lb in).
3. Connect the transaxle wiring harness.
4. Install the case side cover.
