Montana SV6 FWD V6-3.5L VIN L (2005)
3. Connect the thermostat bypass pipe hose.
4. Using the J 38185, reposition and secure the hose clamp at the thermostat bypass pipe.
5. Install the thermostat bypass pipe to the throttle body stud.
6. Install the thermostat bypass pipe to throttle body fasteners.
^
Tighten to 25 Nm (18 ft. lbs.).
7. Connect the heater outlet hose to the thermostat bypass pipe.
8. Connect the inlet hose at the thermostat housing.
9. Using the J 38185, reposition and install the inlet hose clamp at the thermostat housing.
10. Install the spark plug wires at the left bank.
11. Install the air inlet duct.
12. Fill the cooling system.
13. Inspect for leaks.
