pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Restraints - Extender Availability For Seat Belt|Page 5711 > < Restraints - Extender Availability For Seat Belt
Page 1
background image

Seat Belt Extension: Technical Service Bulletins
Seat Belts - Extender Availability

Number

85-2-2A

Date

4/85

Subject:

SEAT BELT EXTENDER

The attached "Parts & Accessories information" bulletin was mailed to all GM dealer parts managers.  Any customer inquiries on seat belt extenders
should be referred to their local dealer's Parts Department.
SUBJECT:

SEAT BELT EXTENDER

TO:

GM DEALERS

GM vehicle   

restraint   

systems   

have   

sufficient   

belt   

length   

to

accommodate most drivers and passengers.  Consequently, requests for belt extensions are minimal. In the event a customer does make such a request,
the attached "Questionnaire" must be completed and sent to the Flint Order Department, attention National Section, where it will be processed as a dealer
order.

The extension is available for most GM vehicles produced in recent years.  The design is such that it can be coupled to the existing belts included in each
vehicle.  Since the extension makes the belt arrangement a "custom fit", use by anyone else, or in a different vehicle, will lessen or nullify the protection
afforded by the restraint system.  Therefore, before the order for the extension can be processed, the  "Questionnaire" must be completed in every
respect, particularly the signature of the person who will be using the extension.  A word of caution -- orders for seat belt extensions should not be
submitted if it is determined that the intent is simply to provide a vehicle occupant with more slack for the sake of comfort.

General Motors Parts is pleased to inform you that effective January 1, 1985, seat belt extenders will be a NO CHARGE item to all GM customers who
request them for their specific vehicles.

Since each extension is made up individually after receipt of order, the customer should expect to experience a reasonable delay in availability.  The time
will vary depending on the vendor and his inventory of materials.

FIGURE 1 - VIN LOCATION

QUESTIONNAIRE

Seat Belt Extender

We have received your request for a Seat Belt Extension. In order to respond, specific information must be supplied regarding the individual and vehicle
involved.

Please answer the following questions:

1.

Write in the Vehicle Identification Number (VIN) of the car or cars in which you need the longer belt. The VIN is located on the left front top
surface of the instrument panel and is visible from the outside of the car. Note the VIN below.

VIN#

-INFORMATION LABEL

2.

Part number, if shown, Manufacturer's Name and Model Number that appears on the label of the seat belt assembly along with the color of the

Restraints - Extender Availability For Seat Belt|Page 5711 > < Restraints - Extender Availability For Seat Belt