Parisienne V8-307 5.0L (1986)
1.
After removing the Headlight Switch from the Instrument Panel, refer to Figure 1 to locate and identify the date code.
2.. The four digit date code will appear the same on any switch regardless of model usage or part number.
3.
If the date code is 0015 or between the range 9235 through 9305, REPLACE THE SWITCH using the correct part number per the PARTS
INFORMATION section. (These codes represent switch manufacturing dates of September 23, 1985 through and including October 1, 1985.)
If the switch is not within the suspect date codes, do not replace. Reconnect the existing switch and proceed to step 4.
4.
Reassemble the Headlight Switch and I/P Trimplate(s) per the applicable Service Manual instructions.
CAMPAIGN IDENTIFICATION LABEL
5.
Install the Campaign Identification Label as outlined below.
PART II - INSTALLATION OF CAMPAIGN IDENTIFICATION LABEL
Each vehicle modified in accordance with the instructions outlined in this service procedure will require a Campaign Identification Label. Each label
provides a space to include the campaign number, the five-digit dealer code of the dealer performing the campaign service, and the date vehicle was
campaigned. This information may be inserted with a typewriter or ballpoint pen. Open hood. Install the label on the radiator baffle where it is readily
visible. Close hood. (Additional campaign labels are available on stationery order as Form 7901-709).
Claim Information
A separate repair order must be used for each vehicle. A completed warranty claim is to be kept as a permanent record of completion.
DEALERS SHOULD SUBMIT WARRANTY CLAIMS FOR CREDIT IN THEIR NORMAL MANNER WHEN THEY PERFORM THE SERVICE
AS FOLLOWS:
Other*
Use Failure
Labor
Labor
Labor
Operation
Code
96
Operation
Hours
Hours
Headlight Switch
96
V3260
.4
.1
Inspect ONLY
Headlight Switch
96
V3262
.4
.1
Inspect and Replace
*In addition dealerships will receive 0.1 hours credit for dealer administrative services associated with this campaign. The 0.1 hours allowance is to be
entered in the "Other Labor Hours" field with each campaign repair listed for credit. This entry will not require authorization.
FAILURE CODE 96 MUST BE USED WITH THE LABOR OPERATION.
Parts required are to be listed in your warranty claim in the normal manner. Parts will be credited at dealer net plus 30% dealer handling allowance.
Dealers will be credited via Warranty Document or Terminal Transmission, whichever is their normal method of submission for payment. Claims must
contain all information required and should list the labor operation as outlined.
REIMBURSEMENT
Claims for customer reimbursement on previously paid repairs are to be submitted to the Zone Office for review and disposition.
RECORDING COMPLETION
Repairs submitted for vehicles not involved in the campaign will not be paid.