Parisienne V8-307 5.0L (1986)
Fuel Injector: Technical Service Bulletins
Inoperative Fuel Injector Cleaner Essential Tool J-35800
Number 86-6(Gasoline)-24 Date
3/86
Subject:
INOPERATIVE FUEL INJECTOR CLEANER ESSENTIAL TOOL J-35800
A possibility exists that some of the subject tools may have been assembled and shipped to dealers with the fuel pick-up tube retaining screw not fully
tightened. This could cause an internal leak and not allow the gasoline/cleaner mixture to enter the engine fuel system.. This poses no danger or fire
hazard.
FUEL TANK
Since the tool is shipped with the fuel hose, gauge, check valve and brass tee fitting unassembled and not installed on the tank, the retaining screw should
be checked prior to assembly. See Figure 1
If these parts have already been assembled remove as shown in Figure 1.
NOTE:
Use back-up wrenches on all fittings when removing and installing.
1.
Tighten retaining screw as shown in Figure 1.
2.
Reinstall parts using a good quality thread compound on all threads prior to assembly.
