pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Customer Interest for Radiator Cooling Fan Motor Relay: > < Power Seat Control Module|Locations
Page 1
background image

Radiator Cooling Fan Motor Relay: All Technical Service Bulletins
A/C Compressor - Loading in Defrost Mode

Number 83-T-30B

Section 1

Date 6/84

Subject:

A/C COMPRESSOR LOADING IN DEFROST MODE - 1982 AND 1983 6000, PHOENIX AND 2000 MODELS

"Please discard previous bulletin 83-T-30A Section 1 issued 7/83 due to change in part numbers and diagram.."

Cooling Fan Relay Wiring

Low engine idle can be caused by high A/C compressor loads due to high head pressures resulting from compressor operation without engine cooling fan
operation while in defrost mode.

This condition can be corrected by installing an additional engine cooling fan relay, Part Number 14078902 for 6000 and Phoenix models or 14073422
for 2000 models, (see diagram) to operate the engine cooling fan in defrost mode.
A connector body, Part Number 12010015 and terminal ends, Part Number 8905087 are available through WDDGM for simplification of the installation
of the additional cooling fan relay.

The relay should be installed on the cowl, adjacent to the pressure cycling switch.  Any wiring run through the cowl should be routed through exisiting
grommets and care be taken to maintain cowl sealing.

WARRANTY INFORMATION

Labor Operation  T3098
Time Allowance   .

4 Hr.

Customer Interest for Radiator Cooling Fan Motor Relay: > < Power Seat Control Module|Locations