Phoenix L4-151 2.5L VIN 5 2-bbl (1982)
Axle Shaft: Technical Service Bulletins
Drivetrain - New Seal Protector for Drive Axle R&R
Bulletin Number:
89-7-20
Reference Number:
977103
Publish Date:
2/89
Subject:
AXLE SEAL PROTECTOR TO PREVENT RIGHT SIDE AXLE SEAL DAMAGE DURING DRIVE AXLE INSTALLATION
Models
Affected:
1980 - 1989 MODELS WITH LISTED TRANSMISSIONS
TRANSAXLE APPLICATIONS:
1982-1989 THM 125/HYDRA-MATIC 3T40 (MD9) 1988-1/2-1989 THM A1/HYDRA-MATIC 3T40-A (MD9) 1984-1989 THM
440-T4/HYDRA-MATIC 4T60 (ME9) 1987-1989 THM F-7 1986-1/2-1989 HM-282/HYDRA-MATIC 5TM40 (MG1/MG2) 1980-1987 FX-125
(MUNCIE) (M19) 1981-1987 FX-170 (MUNCIE) (M19)
FIGURE 1 - AXLE SEAL PROTECTOR
A new low cost disposable Axle Seal Protector (Figure 1) is now available for 1989 and prior models equipped with the above transmissions. The
advantage of this Axle Seal Protector is to prevent axle seal damage during installation of the right side Drive Axle. The right side (both sides for some
manual transaxles) Drive Axle has male splines and a snap ring groove that can potentially nick or cut the seal when the Axle Seal Protector is not used.