pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

A/T - New Low and Reverse Clutch Wave Plate|Page 2727 > < A/T - 3T40/125C New Roller Clutch|Page 2722
Page 1
background image

Clutch: All Technical Service Bulletins
A/T - New Low and Reverse Clutch Wave Plate

Bulletin Number:

91-7-26A

Reference Number:

077148

Publish Date:

2/91

Subject:

LOW AND REVERSE CLUTCH (NEW WAVED PLATE)

Models Affected:

1987-91 FIREBIRD AND SAFARI MODELS WITH 4L60 (700R4)

This bulletin is being revised to correct the part number listed below.  This bulletin cancels and replaces bulletin 91-7-26, dated 02/91.

Figure 2 - Lo And Reverse Clutch Waved Plate

SERVICE INFORMATION: (Figure 2)

Low and Reverse Clutch failure can be caused by case casting flash interfering with clutch plate travel.  A new wave plate is now available which will
alleviate this condition.  This new plate can be used to service any Hydra-matic 4L60 transmission produced after February 9, 1987 (Julian Date 040).

When installing the new wave plate, check for any case flash that may be present in the low and reverse grooves, and use a metal file to remove. See
Figure 2 for case location information.

SERVICE PARTS INFORMATION:

Description

New Part #

Plate - Low and Reverse (Wave)

8676362

Part is currently available from GMSPO.

A/T - New Low and Reverse Clutch Wave Plate|Page 2727 > < A/T - 3T40/125C New Roller Clutch|Page 2722