Solstice L4-2.0L Turbo (2008)
5. Move the striker to eliminate drag on the striker and door latch and to achieve proper door position within door opening. Start with up/down
position, then position the striker to achieve proper alignment to the door opening. Set the in/out adjustment for proper door seal engagement
ensuring that the door closing efforts are correct.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
6. Adjust the striker and add spacers as required.
Tighten the screws to 20 N.m (15 lb ft).
7. Inspect the door for proper operation.
8. Close the door.