Solstice L4-2.0L Turbo (2008)
Install a 50 mm (2 in) piece of weatherstrip inside the folding top side rear weatherstrip (B-pillar). This will act as a stuffer and will help the seal between
the door glass and the weatherstrip by pushing the seal to the glass.
1.
Verify that the side door glass is properly adjusted to the windshield seal and the front and mid-convertible top joint.
2.
Lower the top to gain access to the bottom of the folding top side rear weatherstrip (B-pillar).
3.
Cut two pieces of weatherstrip 50 mm (2 in) long one for each side.
4.
Use a plastic trim tool to compress the inner weatherstrip.
