Solstice L4-2.0L Turbo (2008)
5.
Place the 50 Nm wrench on the front passenger side inboard stud and align the handle with the tunnel.
6.
Pull the wrench until it clicks. Use the floor bump as a guide.
^
If the wrench clicks at or less than 45 degrees, the stud is good.
^
If the wrench pulls beyond 45 degrees and does not click, the stud is suspect and needs to be replaced.
7.
Place the 50 Nm wrench on the rear passenger side inboard stud and rotate the handle to the rear of the folded seat back.
