Solstice L4-2.0L Turbo (2008)
this bulletin. A copy of the customer letter is shown in this bulletin for your use in contacting customers. Recall follow-up cards should not be used for
this purpose, since the customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this recall enters your vehicle inventory, or is in your dealership for service in the future, you must take the
steps necessary to be sure the recall correction has been made before selling or releasing the vehicle.
Disclaimer
Service Procedure
Seat Adjuster Stud Inspection
Important:
Inspect all of the inboard seat adjuster studs.
^
If any of the inboard seat adjuster studs do NOT pass inspection, refer to Seat Adjuster Stud Removal in this bulletin. Only replace the seat
adjuster studs that do NOT pass inspection.
^
If all of the inboard seat adjuster studs pass the inspection, no further action is required.
1.
Place a 50 Nm wrench on the front driver's side inboard stud and align the handle with the tunnel.
