Solstice L4-2.0L Turbo (2008)
17. Remove the brake modulator assembly bolt.
18. Carefully separate the BPMV from the bracket. Do not pry against the accumulator covers on the underside of the brake modulator assembly.
Installation Procedure
1. Inspect the brake modulator assembly bracket insulators for damage and replace if necessary.
Important: If necessary, a small amount of denatured alcohol can be used as an assembly aid for installing the brake modulator assembly
mounting pins to the brake modulator assembly bracket.
2. Install the brake modulator assembly to the bracket.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the brake modulator assembly bolt.
Tighten the bolt to 11 N.m (97 lb in).
