Solstice L4-2.0L Turbo (2008)
3. Remove the timing chain tensioner.
4. Install a 24 mm wrench onto the hex on the camshaft in order to hold the camshaft.
5. Loosen, but DO NOT remove the exhaust camshaft actuator bolt.
Important: Ensure that the tips of the EN 46327 are fully engaged into the timing chain.
6. Install one of the tools (1) from the EN 46327 to the exhaust camshaft side of the timing chain assembly in order to retain the timing chain. Firmly
tighten the nuts.
Important: Ensure that the tips of the EN 46327 are fully engaged into the timing chain.
7. Install one of the tools (1) from the EN 46327 to the intake camshaft side of the timing chain assembly in order to retain the timing chain. Firmly
tighten the nuts.