Solstice L4-2.0L Turbo (2008)
19. Remove and discard the upper O-ring seal (1) and plastic spacer (2) from the injector(s).
20. Carefully remove and discard the lower nylon seal (4) from the injector(s).
Installation Procedure
1. Install a NEW plastic spacer (2) onto the fuel injector(s).
2. Lubricate a NEW O-ring seal (1) with silicon free engine oil GM P/N 12345610 (Canadian P/N 993193) or equivalent.
3. Install the NEW O-ring seal (1) onto the fuel injector (s).