Solstice L4-2.0L Turbo (2008)
Fuel Pressure Release: Service and Repair
Fuel Pressure Gage Installation and Removal (with CH 48027-100)
Fuel Pressure Gage Installation and Removal (with CH 48027-100)
Special Tools
CH-48027-100 Digital Pressure Gage
Installation Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution (See: Fuel/Service Precautions/Gasoline/Gasoline Vapors Caution) .
Caution: Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the risk of personal injury.
After you relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel lines, the fuel injection pump, or the
connections. In order to reduce the risk of personal injury, cover the fuel system components with a shop towel before disconnection. This will catch any
fuel that may leak out. Place the towel in an approved container when the disconnection is complete.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Low Pressure Side with CH 48207) (See: Fuel Pressure Relief (Low Pressure Side
with CH 48207))Fuel Pressure Relief (Low Pressure Side with CH 48027-100) (See: Fuel Pressure Relief (Low Pressure Side with CH
48027-100))Fuel Pressure Relief (Low Pressure Side w/o CH 48207) (See: Fuel Pressure Relief (Low Pressure Side w/o CH 48207))Fuel
Pressure Relief (Low Pressure Side w/o CH 48027-100) (See: Fuel Pressure Relief (Low Pressure Side w/o CH 48027-100))Fuel Pressure Relief
(High Pressure Side) (See: Fuel Pressure Relief (High Pressure Side)) .
2. Connect the CH-48027-1 (1) to the CH-48027-2 (2).
3. Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
4. Perform any tests and/or diagnostics as needed. For the proper usage of the CH-48027-100 , refer to the manufacture's directions.
Removal Procedure
