Solstice L4-2.0L Turbo (2008)
18. Install the fuel feed and EVAP pipe clip to the coolant tube bracket.
19. Remove the cap or plug from the fuel feed pipe, fuel rail and EVAP line.
20. Connect the fuel feed pipe (1) to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service and
Repair/Metal Collar Quick Connect Fitting Service) .
21. Connect the EVAP pipe (2) to the purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service and
Repair/Plastic Collar Quick Connect Fitting Service) .
22. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair) .
23. Inspect for fuel leaks using the following procedure:
1. Turn ON the ignition, with the engine OFF for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.
