Solstice L4-2.0L Turbo (2008)
9. Loosen the high pressure fuel pipe fitting at the fuel pump.
10. Loosen the high pressure fuel pipe fitting at the fuel rail.
11. Remove and discard the high pressure fuel pipe.
Installation Procedure
1. Ensure that the high pressure fuel pump, and fuel rail fittings are clean prior to assembly.
2. Install the NEW high pressure fuel pipe.
3. Tighten the NEW high pressure fuel pipe fitting to the fuel rail hand tight.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Tighten the NEW high pressure fuel pipe fitting to the high pressure fuel pump hand tight.
Tighten the fittings to 32 N.m (24 lb ft).
