Solstice L4-2.0L Turbo (2008)
8. Connect the engine wiring harness electrical connector (1) to the high pressure fuel pump.
9. Install the engine wiring harness clip (3) to the high pressure fuel pump cover.
10. Inspect for leaks using the following procedure:
1. Turn ON the ignition, with the engine OFF for 2 seconds.
2. Turn OFF the ignition, for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.
11. Install the low side fuel pressure service port cap.
12. Tighten the fuel fill cap.
13. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair) .
14. Install the air lnlet screen support and nuts.
Tighten the nuts to 10 N.m (89 lb in).
