Solstice L4-2.0L Turbo (2008)
Fuel Supply Line: Service and Repair
Fuel Hose/Pipes Replacement - Chassis
Fuel Hose/Pipes Replacement - Chassis
Removal Procedure
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Low Pressure Side with CH 48207) (See: Fuel Filter/Fuel Pressure
Release/Service and Repair/Fuel Pressure Relief (Low Pressure Side with CH 48207))Fuel Pressure Relief (Low Pressure Side with CH
48027-100) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel Pressure Relief (Low Pressure Side with CH 48027-100))Fuel
Pressure Relief (Low Pressure Side w/o CH 48207) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel Pressure Relief (Low
Pressure Side w/o CH 48207))Fuel Pressure Relief (Low Pressure Side w/o CH 48027-100) (See: Fuel Filter/Fuel Pressure Release/Service and
Repair/Fuel Pressure Relief (Low Pressure Side w/o CH 48027-100))Fuel Pressure Relief (High Pressure Side) (See: Fuel Filter/Fuel Pressure
Release/Service and Repair/Fuel Pressure Relief (High Pressure Side)) .
2. Disconnect the evaporative emission (EVAP) pipe (2) quick connect fitting from the purge solenoid. Refer to Plastic Collar Quick Connect Fitting
Service (See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
3. Disconnect the fuel feed pipe (1) from the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service and
Repair/Metal Collar Quick Connect Fitting Service) .
4. Cap or plug the fuel feed pipe, fuel rail and EVAP line to in order to system prevent contamination.
5. Remove the fuel feed and evaporative emission (EVAP) pipe clip from the coolant tube bracket.
