Solstice L4-2.0L Turbo (2008)
Important: Inspect the CMP sensor for damage. Replace as necessary.
1. Lubricate the CMP sensor O-ring seal with clean engine oil.
2. Install the CMP sensor. (Intake CMP shown, exhaust CMP similar)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the CMP sensor bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Connect the engine wiring harness electrical connector (4) to the exhaust CMP sensor.
