Solstice L4-2.0L Turbo (2008)
Transmission Speed Sensor: Service and Repair
Output Speed Sensor Replacement
Output Speed Sensor Replacement
Removal Procedure
1. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement (See: Transmission and
Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement) .
2. Disconnect the electrical wiring harness connector (3) from the output speed sensor (2).
3. Remove the output speed sensor bolt (3).
4. Remove the output speed sensor (2).
5. Remove the output speed sensor spacer (1).
6. Inspect the output speed sensor (2) for the following conditions:
*
Damaged or missing magnet
*
Damaged housing
*
Bent or missing electrical terminals
Installation Procedure
1. Install the output speed sensor spacer (1).
2. Install the output speed sensor (2).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .