Solstice L4-2.0L Turbo (2008)
Turn Signal Switch: Service and Repair
Turn Signal Multifunction Switch Replacement
Removal Procedure
1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Covers Replacement) .
2. Disconnect the turn signal multifunction switch electrical connector.
3. Depress the locking tabs and remove the turn signal multifunction switch (1).
Installation Procedure
1. Install the turn signal multifunction switch (1). Ensure the locking tabs are snapped into place.
2. Connect the turn signal multifunction switch harness connector.
