Solstice L4-2.0L Turbo (2008)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement - Intake
Camshaft Position Sensor Replacement - Intake
Removal Procedure
1. Remove the fuel feed intermediate pipe. Refer to Fuel Feed Intermediate Pipe Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Supply Line/Service and Repair) .
2. Disconnect the engine wiring harness electrical connector (2) from the intake camshaft position (CMP) sensor.
3. Remove the CMP sensor bolt.
4. Remove the CMP sensor.
Installation Procedure