Solstice L4-2.0L Turbo (2008)
Important: It may be necessary to remove the chamfer (bevel) from the edge of an 18 mm socket in order to get full engagement on the
thin-headed flywheel bolts.
5. Remove the flywheel bolts, if equipped with a automatic transmission.
Important: Do not orientate the flywheel to the crankshaft. It is balanced separately from the engine.
6. Remove the flywheel.
7. Clean the thread adhesive from the flywheel bolt holes. Use a nylon bristle brush to clean the holes in the crankshaft.
8. Remove the flywheel bolts, if equipped with a manual transmission.
9. Remove the flywheel.
10. Clean the thread adhesive from the flywheel bolt holes. Use a nylon bristle brush to clean the holes in the crankshaft.
Installation Procedure
