Solstice L4-2.4L (2007)
4. Using a MIG-welder, weld the front bumper bracket to the vehicle, duplicating the factory welds.
5. Clean and prepare all welded surfaces.
6. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
7. Paint the repair area. Refer to Paint Identification.
8. Install all related panels and components.
9. Connect the negative battery cable.
10. Enable the SIR system. Refer to SIR Disabling and Enabling.