Solstice L4-2.4L (2007)
Rear Bumper Reinforcement: Service and Repair
Impact Bar Replacement - Rear Bumper
Impact Bar Replacement - Rear Bumper
TOOLS REQUIRED
J 42058 Frame Adapter Clamp
REMOVAL PROCEDURE
CAUTION: Refer to Approved Equipment for Collision Repair Caution.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zones.
2. Disconnect the negative battery cable.
3. Remove all related panels and components.
4. Remove or reposition the wiring to avoid damage.
5. Repair as much of the damage as possible to the factory specifications.
6. Use J 42058 to secure the vehicle if pulling and straightening are required.
7. Locate the area inside the rear tub (1) over the top welds of the rear bar.
