Solstice L4-2.4L (2007)
4. With a small screw driver, align the anchor plate and install the screw.
5. Remove the lower screw and discard the striker.
6. Install the new striker and the lower screw.
7. Remove the upper screw and rotate the striker back in place.
8. With a small screw driver, align the anchor plate and install the screw.
Tighten
Tighten the screw to 20 Nm (15 lb ft).
9. Check the alignment of the door to the door striker. Refer to Door Lock Striker Adjustment in SI.
Parts Information
Warranty Information
