Solstice L4-2.4L (2007)
Important:
*
If the balance shafts are not properly timed to the engine, the engine may vibrate or make noise.
*
Install the balance shaft to the engine using the following steps:
Place the number one cylinder at top dead center (TDC).
4. Lubricate the balance shaft lobes with engine oil.
5. Install the right (intake) balance shaft.
Notice: Refer to Fastener Notice.
6. Install the right (intake) balance shaft bolt (1).
Tighten the bolt to 10 N.m (89 lb in).
7. Install the timing chain, sprocket and tensioner.
