Solstice L4-2.4L (2007)
Important: Ensure the timing chain tensioner seal is centered throughout the torque procedure to eliminate the possibility of an oil leak.
8. Install the timing chain tensioner assembly.
Tighten the timing chain tensioner to 75 N.m (55 lb ft).
9. The timing chain tensioner is released by compressing the tensioner 2 mm (0.079 in) which will release the locking mechanism in the ratchet. To
release the timing chain tensioner, use a suitable tool with a rubber tip on the end. Feed the tool down through the cam drive chest to rest on the
cam chain. Then give a sharp jolt diagonally downwards to release the tensioner.
10. Install the camshaft cover.
11. Connect the negative battery cable.
