Solstice L4-2.4L (2007)
16. If previously removed, install a new cup plug. Lubricate the cup plug with transmission fluid before installation.
17. Insert the cup plug into the transmission until flush with the transmission case.
18. Place the transmission in the park position by rotating the shift shaft fully counterclockwise.
19. Install the transmission manual shift shaft nut (1).
Tighten the nut to 9 N.m (80 lb in).
20. Install the transmission.
21. Install the front closeout panel.
22. Lower the vehicle.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
23. Reset the TAP values. Refer to Transmission Adaptive Functions.
