pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Instrument Panel - Rattle or Squeak/Door Panel Scratched|Page 9928 > < Instrument Panel - Rattle or Squeak/Door Panel Scratched|Page 9926
Page 9
background image

17.

Remove the instrument panel cluster assembly.

18.

Remove the defroster duct.

19.

Remove the passenger side SIR inflator module.

20.

Remove the multi-function switch/lever.

21.

Remove the windshield wiper washer lever.

22.

Remove the lower instrument panel assembly from the vehicle.

23.

Loosen the upper steering column attaching bolts.

24.

Remove the lower heater duct trim covers.

25.

Loosen the tie bar fasteners, align the tie bar as shown and tighten the tie bar fasteners.

26.

Install the lower heater duct trim covers.

27.

Tighten the upper steering column attaching bolts.

28.

Install the lower instrument panel assembly to the vehicle.

29.

Install the windshield wiper washer lever.

30.

Install the multi-function switch/lever.

31.

Install the passenger side SIR inflator module.

32.

Install the defroster duct. 

33.

Install the instrument panel cluster assembly.

34.

Install the steering wheel.

35

Install the driver's side SIR inflator module.

36.

Install the steering column covers.

37.

Install the tilt lever.

38.

Install the air distribution duct.

39.

Install the radio.

40.

Install the HVAC control.

41.

Install the instrument panel trim pad.

42.

Install the instrument panel cluster trim plate (Cavalier only).

43.

Install the storage compartment trim plate with compartment lamp (Sunfire only).

44.

Install the accessory trim plate and close the storage compartment door (Sunfire only).

45.

Install the instrument panel valance (Sunfire only).

46.

Install the instrument panel end panels.

47.

Install the defroster grille.

48.

Enable the SIR system.

49.

Connect the negative battery cable.

Instrument Panel - Rattle or Squeak/Door Panel Scratched|Page 9928 > < Instrument Panel - Rattle or Squeak/Door Panel Scratched|Page 9926