Sunfire L4-138 2.3L DOHC VIN D MFI (1995)
ABS Brake Modulator/Master Cylinder Assembly Components
Install or Connect
1. Two transfer assemblies.
^
Lubricate transfer tube assembly O-rings with clean brake fluid.
^
Install transfer tube assemblies in ports in ABS brake modulator and push in by hand to bottom.
2. Lubricate new banjo bolt O-ring with clean brake fluid and install into the master cylinder and ABS hydraulic modulator.
3. ABS hydraulic modulator to master cylinder.
^
Clamp mounting flange of master cylinder in a vise.
^
Hold ABS hydraulic modulator and rock into position on master cylinder, inserting transfer tube assemblies into master cylinder ports.
4. Two ABS hydraulic modulator to master cylinder banjo bolts.
Tighten
^
Banjo bolts to 24 Nm (17 ft. lbs.).
