Sunfire L4-138 2.3L DOHC VIN D MFI (1995)
Gear Position
5. With the ABS hydraulic modulator upside down, and the gears facing you, rotate each ABS hydraulic modulator gear counterclockwise until
movement stops. This procedure will position the pistons very close to the top of the modulator bore simplifying the brake bleeding procedure.
6. ABS motor pack to ABS hydraulic modulator/master cylinder assembly.
7. Four Torx head screws.
Tighten
^
Torx® head screws to 5 N.m (44 lb.in.).
8. Gear cover to hydraulic modulator-master cylinder assembly.
Tighten
^
Torx® bolts to 4 N.m (36 lb.in.).
Master Cylinder
Brake Master Cylinder Unit Repair
The Unit Repair Procedure for the Brake Master Cylinder is located under
Hydraulic System, Brakes / Master Cylinder / Service and Repair /
Procedures / Brake Master Cylinder Disassembly and Assembly
