Sunfire L4-138 2.3L DOHC VIN D MFI (1995)
3.
Remove valence panel from front of I/P by carefully disengaging two pins from grommets (one at each end) and six clips. See figure 2.
IMPORTANT:
DO NOT SCRATCH TOPPER PAD WITH VALENCE CLIPS WHEN REMOVING THE VALENCE.
4.
Remove LH and RH end caps - 1 Phillips head screw each end cap. See figure 3.
5.
Open glove box door to gain access to glove box trim plate screws and accessory trim plate screws.
6.
Remove glove box trim plate - three Phillips head screws. See figure 2.