Sunfire L4-138 2.3L DOHC VIN D MFI (1995)
Ignition Control Module: Service and Repair
Ignition Coil and Electronic Ignition Control Module Assembly Disassembled (Typical)
REMOVE OR DISCONNECT
1. Remove negative battery cable.
2. Disconnect 11 pin harness connector.
3. Remove ignition system assembly to cam housing bolts (4).
4. Remove ignition system assembly from engine.
5. Remove housing to cover screws (4).
6. Remove housing from cover.
7. Disconnect coil harness connector from module.
8. Remove module to cover screws (3).
