pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

3T40 Automatic Transaxle|Page 7491 > < Diagram Information and Instructions|Page 7488
Page 1
background image

Torque Converter Clutch Solenoid: Service and Repair
3T40 Automatic Transaxle

Torque Converter Clutch (TCC) Solenoid

TORQUE CONVERTER CLUTCH (TCC) SOLENOID & SWITCHES

Torque Converter Clutch Solenoid & Switches

REMOVE OR DISCONNECT

1. Valve body cover. Refer to "Valve Body Cover" and "Transaxle Support Assembly".
2. Wiring harness from case electrical connector and leads from pressure switch.
3. Torque converter clutch bolt to auxiliary valve body.
4. 3rd clutch pressure switch.
5. Second clutch switch, if applicable.

INSTALL OR CONNECT

1. Second clutch switch, if applicable.

TIGHTEN

^

Switch to 11 Nm (97 lbs. in.).

2. 3rd clutch pressure switch.

TIGHTEN

^

Switch to 11 Nm (97 lbs. in.).

3. Torque converter clutch bolt to auxiliary valve body. Install new O-ring.
4. Wire harness to case and switches.
5. Valve body cover with a new gasket.

ADJUST

^

Fluid level.

Valve Body Cover

VALVE BODY COVER

3T40 Automatic Transaxle|Page 7491 > < Diagram Information and Instructions|Page 7488