Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Amplifier: Service and Repair
AMPLIFIER REPLACEMENT
REMOVAL PROCEDURE
1. Pull back the rear compartment trim panel to gain access to the amplifier.
2. Remove the nuts from the amplifier. Remove the amplifier from the bracket.
3. Disconnect the electrical connector from the amplifier.
INSTALLATION PROCEDURE
1. Install the amplifier to the bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the nuts to the amplifier.
Tighten
Tighten the amplifier nuts to 6 N.m (53 lb in).
3. Connect the electrical connector to the amplifier.
4. Pull back the rear compartment trim panel. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.
