Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
3. Starting at the rear, pull the carpet retainer upward to disengage the retaining clips.
4. Remove the carpet retainer (1) from the vehicle.
Installation Procedure
1. Position the rear carpet retainer (1) aligning the retaining clips.
2. Apply pressure to assure the retainers lock into place at all locations.
3. Press in on the windshield garnish mold to engage its retainers.
4. Engage the tab at the hood latch release handle (left side only). Ensure that the unit is retained.
Carpet Retainer Replacement (Sedan)
Carpet Retainer Replacement (Sedan)
Removal Procedure
1. Remove the rear quarter lower trim panel.
2. Remove the center pillar upper trim panel. Center Pillar Upper Trim Panel Replacement.
3. Remove the windshield garnish molding at the bottom.
4. Pull up on the carpet retainer (1) to disengage the fasteners.
5. Remove the carpet retainer (1) from the vehicle.
Installation Procedure
