Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Parking Brake Lever: Service and Repair
Park Brake Lever Assembly Replacement
Removal Procedure
1. Remove the console. If you are repairing a Pontiac, remove the shift boot.
2. Move the park brake lever (6) to the OFF position.
3. Disconnect the electrical connector (1).
4. Raise and support the vehicle. Refer to Vehicle Lifting.
5. Have an assistant pull and hold the cable towards the rear of the car in order to create slack in the cable.
6. Have the assistant pull the cable until the notch on the ratchet (1) is visible through the cover plate opening (4).
7. Push the pawl spring (5) downward toward the notch in the ratchet (1).