Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
1. Ensure that the pawl spring (5) is engaged with the notch on the ratchet (1).
2. Install the front parking brake cable to the lever assembly (2) and secure the cable conduit fitting (4) into the lever assembly (2).
3. Install the front parking brake cable button (3) to the ratchet.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the parking brake lever assembly (2) and the shift assembly. Install the attaching nuts.
Tighten
Tighten the nuts to 25 Nm (18 ft. lbs.).
5. Connect the electrical connector (1).
6. Raise and support the vehicle. Refer to Vehicle Lifting.
7. Pull on the front parking brake cable at the rear of the vehicle in order to release the pawl spring from the notch on the ratchet.
