Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
9. Install the camshaft housing cover to the camshaft housing.
Notice: Refer to Fastener Notice in Service Precautions.
10. Use the J36660-A Torque Angle Meter, in order to install the bolts.
^
Tighten the camshaft housing to cylinder head bolts to 15 Nm (11 ft. lbs.) + 90 degrees.
^
Tighten the camshaft housing cover to camshaft housing bolts to 15 Nm (11 ft. lbs.) + 30 degrees.
11. Install the timing chain housing to camshaft housing and the timing chain.
12. Install the exhaust camshaft housing end cover gasket and cover.
13. Reinstall any spark plugs boot connector assembly that stuck to a spark plug, back onto the ignition coil and module assembly.
14. Install ignition coil and module assembly.
15. Connect the negative battery cable.