Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Turn Signal Lamp: Description and Operation
The TURN-B/U fuse and the STOP/HAZ fuse in the IP fuse block, supplies battery positive voltage to the flasher module. The turn signal lamps may
only be activated with the ignition switch in the ON position. When the turn signal switch is placed in either the left or right position, current flow is from
the flasher module's output to the turn signal switch assembly. The flasher module then sends an on-off voltage signal to either the left or right turn
signals and their Instrument Panel Cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn
signal indicators.
