pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Fuel Pressure Gage Installation and Removal|Page 1513 > < Fuel Pressure Gage Installation and Removal
Page 2
background image

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the J 29658-D with the J 29658-500 from the fuel feed hose and the chassis fuel pipe.
3. Connect the fuel teed hose (6) to the chassis fuel pipe. 
4. Connect the negative battery cable.
5. Turn ON the ignition, with the engine OFF.
6. Inspect for fuel leaks.

Fuel Pressure Gage Installation and Removal|Page 1513 > < Fuel Pressure Gage Installation and Removal