Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Data Link Connector: Service and Repair
DATA LINK CONNECTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the screws from the data link connector.
2. Reposition the data link connector from the instrument panel.
INSTALLATION PROCEDURE
1. Position the data link connector to the instrument panel.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws to the data link connector.
Tighten
Tighten the data link connector screws to 2 N.m (18 lb in).
