Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
5. Connect the PCM electrical connectors (1).
Tighten
Tighten the PCM electrical connectors screws to 8 N.m (71 lb in).
6. Install the horn.
Tighten
Tighten the horn retainer bolt to 10 N.m (89 lb in).
7. Connect the horn electrical connector.
8. Install the right engine splash shield.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
9. Lower the vehicle.
10. Connect the negative battery cable.
11. Reprogram the PCM. Refer to Powertrain Control Module (PCM) Programming and perform the Crankshaft Position (CKP) system variation learn
procedure. Refer to CKP System variation Learn Procedure. See: Testing and Inspection/Programming and Relearning
