Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
1. Slide the PCM (2) into the PCM retainer (1).
2. Reinstall the protective cover (if equipped).
3. Slide the PCM assembly (1) into the PCM bracket slots (2).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the PCM attaching bolts (1).
Tighten
Tighten the PCM attaching bolts to 10 N.m (89 lb in).
NOTE: Do not touch the PCM connector pins or soldered components on the circuit board in order to prevent possible electrostatic discharge (ESD)
damage. Do not remove the integrated circuit boards from the carrier.
