Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Air Filter Element: Service and Repair
AIR CLEANER ELEMENT REPLACEMENT
REMOVAL PROCEDURE
1. Remove the upper air cleaner screws.
2. Loosen the upper air cleaner cover (1).
3. Disconnect the intake air temperature IAT sensor connector.
4. Remove the air cleaner filter (2) from lower air cleaner housing (3).
INSTALLATION PROCEDURE
1. Install the air cleaner filter (2) into the lower air cleaner housing (3).
2. Install the upper air cleaner cover (1) to lower air cleaner housing.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Tighten the upper air cleaner screws.
Tighten
Tighten the upper air cleaner cover screws to 3 N.m (26 lb in).
4. Reconnect the IAT sensor connector.
